MTF Vertical Vibrator with Lateral Flange
by Italvibras
The new MTF (MTF-S02), series, made up of vertical vibrators with lateral flange and with weight protection covers fixed to the opposite part to the flange, adopts innovative technical solutions that increase performance and reliability. Typically used in circular screens and in small and medium-size sieves, these vibrators are supplied with lamellar or clamped eccentric weights, which regulation is particularly easy. The MTF series complies with the most recent IEC and EN international standards for use in atmospheres with potentially explosive powders. In particular, the MTF series can be used in areas 21 and 22.
Category: LL 2 d
Level of protection: tD A21 IP66
EC certificate: LCIE 05 ATEX 6163 X
Zones of use: 21, 22
Technical features
Power supply
Three-phase voltage from 24V to 690V, 50Hz or 60Hz or single-phase 100-130V, 60Hz and 200-240, 50Hz (single-phase types are supplied without capacitor); suitable for use with an inverter from 20Hz to the base frequency with constant torque load profile.
Polarity
2 or 4 poles
Conformity with European Directives
Low Voltage 2006/95/EC, ATEX 94/9/EC.
Reference Regulations
EN 60034-1, IEC/EN 61241-0, IEC/EN 61241-1.
Functioning
Continual service (S1) at maximum declared centrifugal force and electric power. Intermittent services are also possible depending on the type of vibrator and the operating conditions.
Centrifugal force
In all positions and therefore without restriction.
Mechanical protection
IP66 according to IEC 529, EN 60529. Mechanical protection is ensured in the mounting phase of the vibrator onto the vibrating machine, by introducing the special seal into the seat on the coupling flange.
Protection against mechanical impacts
IK08 according to IEC 68, EN 50102.
Insulation class
Class F (155°C), class H (180°C) on request.
Tropicalization
Standard on all vibrators, with vacuum encapsulation up to size 30, with "drop by drop" trickle system for larger sizes.
Fixing of the vibrator
In all positions and therefore without restrictions.
Lubrication
All vibrators are lubricated in the factory and do not require further lubrication if used in normal operating conditions ("FOR LIFE" lubrication). In heavy duty operating conditions periodical re-lubrication may be applied to frame sizes 40-50-70.
Electrical connection box
The size guarantees the passage of tools used for fixing the vibrator to the vibrating machine. The electrical connection must be carried out using the relative connectors inserted inside the connection box. Special shaped terminals allow to fix the power supply cable, protecting it from loosening.
Electric motor
Three-phase asynchronous type. Designed for maximum starting torques and torque curves specific to requirements of vibrating machines. Insulated windings through vacuum encapsulating up to size 30, using "drop by drop" trickle system for larger sizes.
Casing
In high-tensile aluminium alloy up to size 50, in spheroidal cast iron for size 70.
Bearing flange
The size guarantees passage of tools used for fixing the vibrator to the vibrating machine. The electrical connection must be carried out using the relative connectors inserted inside the connection box. Special shaped terminals allow to fix the power supply cable, protecting it from loosening.
Bearings
The lower and upper bearings have been studied to support the relative load and therefore they have a particular geometry, especially designed and made for Italvibras.
Motor shaft
In treated steel alloy (Isothermic hardening) resistant to stress.
Eccentric weights
Allow greater adjustment of the centrifugal force, with phase shift of the lower weight assembly with respect to the upper group. This adjustment is eased by a graduated scale, which expresses the centrifugal force as a percentage of the maximum centrifugal force.
Weight covers
In aluminium alloy, mounted only on the lower side. The flange side does not have weight cover. Size 40 is supplied without weight covers on both sides.
Painting
Electrostatic surface treatment based on polymerised epoxy polyester powder in oven at 200°C. Tested in salt spray for 500 hours.
Stainless steel protection
On request, corrosion high grade protection (stainless steel micro suspensions in a polyurethanic paint) is availalbe.
Contact our office for the many Certifications available. 1-888-558-9956