Besides their fail-safe design, as with the rest of our lifting products, the NEO50 & NEO60 also carry a High-Brightness LED status indicator, an additional safety measure which shows the lifting hook's status at all times with a bright 4 colour colour-code scheme visible from the operator's position.

• Green: Lifting Hook is Open / Release Load
• Red: Intermediate: Do Not Lift!
• Blue: Lifting Hook is Closed / Lift & Manoeuvre Load
• White: Low Battery

You will never have to worry about a discharged battery with the rechargeable Li-Ion technology of NEO's high-capacity battery.

When the hook is in Smart Nap Mode, its electronics and LED status indicator will not activate themselves until the hook has made contact with the load's lifting point, improving the batteries' efficiency and energy consumption. The slot cover is also protected with a safety lock which protects the battery from falling in case of impact.

By means of the eMAX remote control, the electronics of the lifting hook can be configured so that when the battery charge is below a preset threshold by the user, the hook can only be opened. With this threshold, even is the battery is almost discharged, you will always be able to open the lifting hook and release the load.

With the “Always On” mode, the colour code scheme of the LED status indicator will always be visible. Blue - for closed - and green - for open - are continuous for 10 seconds and then take an intermittent pattern in order to save battery. Activate this mode by pushing the top button beside the battery.

Battery Duration: 5,000 cycles / 250 hours in standby mode.

The “Smart Nap” mode reduces battery consumption by activating the LED's colour-code scheme when the NEO'shook commences its closing motion. Up until that moment,the lifting hook is in sleeper mode and its electronics and battery are not active.

Battery Duration: 5,000 cycles / up to 2 months in standby mode.

Both the NEO50 & NEO60 are equipped with a load cell. This load cell is precise, reliable, rugged, compact and fully integrated into the lifting hook, representing no increase in weight or dimensions of the unit. With the load cell, as of 1% of the working load limit of the hook, the intermittence of the LED Status Indicator is of a higher frequency. With this feature, it is visually recognizable that the lifting hook is closed and with a suspended load. This feature is optional.

Thanks to its fail-safe design, once the load is correctly placed on the lifting hook, it is not possible to release or drop the cargo that is being lifted.

Remotely engage any load with any of the Elebia remote controls. All of them allow a simple and reliable control in a fail-safe way. Send all the necessary orders and receive all the info from the NEO50 & NEO60 lifting hooks straight to your remote control.

A metal tip can be inserted to facilitate NEO's orientation and approach to the lifting point. Fabricated from high-strength steel, it is reinforced to protect the hook against impacts.This feature is optional

The ARC 50 by Codipro is a lifting point specially designed for handling heavy loads, and particularly suited for lifting moulds. It has been conceived to be used with the NEO50/NEO60 lifting hook, although it can also be used in combination with other lifting hooks, shackles with a diameter of less than 100mm and also with the NEO20 lifting hook.

If there's ever the need to manually override NEO's electronics, the process is very simple. At ground level, simply open the cover and wait until LEDs turn green. If the manual override process has to be carried out at height a simple 3 step procedure is all it takes:

1. Insert the end/tip of pole in the cover's slot.
2. Lower the end/tip of pole until it reaches the narrow lower bottom end of the cover's slot.
3. Pull until the cover opens and wait until LEDs turn green.

Ground Level Demo Video | At Height Demo Video

The NEO60 lifting hook carries an electromechanical counter for cycle recording.